N1.C
Use the recorded plat reference
A lot-and-block description identifies a parcel by reference to a recorded subdivision map, or plat. An example: Lot 8, Block C, Meadow View subdivision, with the plat book and page where the county recorded it. The plat supplies the location and boundaries the short description relies on.
"Lot 8" by itself doesn’t tell you which of many Lot 8s you mean. Confirm the subdivision and recording reference, and check that you have the right version of the plan. A plat also shows streets, easements and other features, so reading only the lot number can miss important limits.
A lot-and-block reference and a metes-and-bounds description can describe the same land in different ways. Neither method promises that the seller owns everything shown or that every proposed use is lawful. You still need title work, survey evidence and a zoning check.
Work the example
An agreement identifies only Lot 8, with no subdivision name or map reference.
What’s missing from a usable lot-and-block description?
Show answer and reasoning
The subdivision name and the recorded plat reference that locate that lot.
Many subdivisions have a Lot 8. The recorded map supplies the context.
Lot number plus the correct recorded map identifies the parcel.
Sources and full lesson context
- Federal sourceBLM, Specifications for Descriptions of Land
- National concept referenceMaine Revenue Services, 2026 property and measurement referenceAnother state's teaching guide, used for general concepts. Its state-specific rules do not establish Pennsylvania law.
Last reviewed November 15, 2026.
N1.C
Locate the township before locating the section
The Public Land Survey System, also called the rectangular or government survey system, uses principal meridians running north and south and base lines running east and west. Township tiers are numbered north or south of a base line. Ranges are numbered east or west of a principal meridian.
A standard survey township is six miles by six miles, or 36 square miles. T. 3 N., R. 2 W. means the third township tier north of the base line and the second range west of the principal meridian. It isn’t three miles north and two miles west. The principal meridian and state complete the location, since every meridian has its own grid.
A survey township is a land-description term, not necessarily a local government. Real grids include correction lines, fractional townships, irregular sections and government lots. Use the standard dimensions for an exam problem, but don’t assume every township on the ground is a perfect square.
North is at the top. Start at 1 in the northeast, move west to 6, then reverse direction for the next row.
NORTH ↑ · nominally 6 miles across
| 6 | 5 | 4 | 3 | 2 | 1 |
| 7 | 8 | 9 | 10 | 11 | 12 |
| 18 | 17 | 16 | 15 | 14 | 13 |
| 19 | 20 | 21 | 22 | 23 | 24 |
| 30 | 29 | 28 | 27 | 26 | 25 |
| 31 | 32 | 33 | 34 | 35 | 36 |
36 sections · nominally 36 square miles
Standard survey model. Actual surveys can contain corrections and fractional sections.
Work the example
A description uses T. 3 N., R. 2 W. with a named principal meridian.
What does the 2 W identify?
Show answer and reasoning
The second range west of the principal meridian.
Range position is east or west of the meridian; township tier is north or south of the base line.
Township: north or south. Range: east or west.
Sources and full lesson context
- Federal source43 U.S.C. § 751, federal survey framework
- Federal sourceBLM, Specifications for Descriptions of Land
- Federal sourceBLM, Cadastral Surveying classroom guide
Last reviewed November 15, 2026.